Changzhou Vic-Tech Motor Technology Co., Ltd.
Motor Manufacturer，Rreliable Quality， Price Concessions
Add to Cart
Motor basic step angle is 18 degrees, that is, 20 steps per turn, plus the deceleration box deceleration effect, the final motor rotation angle resolution can reach 0.05~6 degrees, can be used in many requirements
ApplicationAbout Micro stepper motor
Our micro stepper motors generally have 18 degrees step angle.(Full step driving)
That means it takes 20 steps to rotate one turn.
Motor’s step angle is related to internal stator’s design.
We have micro stepper motors with different diameters, and motor’s torque is related to its size.
Here is relationship between motor’s diameter and torque(with suitable running frequency, at rated voltage):
6mm motor: about 1 g*cm
8mm motor: about 3g*cm
10mm motor: about 5 g*cm
15mm motor: about 15 g*cm
20mm motor: about 40 g*cm
Intelligent Security Products
Camera Lenses
Door Locks
Wearable device
| Product Name | 10mm micro stepper motor | |||
| Model | VSM1070 | |||
| Rated Voltage | 3.3V | |||
| Current Per Phase | 100 mA /phase | |||
| Coil Resistance | 40 Ω±7% | |||
| No. Of phase | 2 Phases | |||
| Step Angle | 18 degree | |||
| Excitation Method | 2 Phase Excitation | |||
| Drive Mode | Bipolar Drive | |||
| Pull-In Torque | 5.4 gf.cm ,(AT 5.0 V DC) | |||
| Pull-Out Torque | 6.0 gf.cm ,(AT 5.0 V DC) | |||
| Max. Response Frequency | 1250 pps,(AT 900 PPS , 5.0 V DC) | |||
| Max. Starting Frequency | 1950 pps,(AT 900 PPS , 5.0 V DC) | |||
| Insulation Class | Class E for Coils | |||
| Insulation Strength | 100 V AC for One Second | |||
| Insulation Resistance | 1.0 MΩ (DC 100 V) | |||
| Operating Temperature Range | -10~+60 ℃ | |||
| Weight | 4 g(Ref.) | |||
| OEM & ODM SERVICE | AVAILABLE | |||
Competitive Advantage
Customization service
Motor’s design can be adjusted based on customer’s requirement including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter motor
Coil resistance/ rated voltage: coil resistance is adjustable, and with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to be longer/short, with special design such as mounting holes, it’s adjustable.
PCB + cables + connector: PCB’s design, cable length and connector pitch are all adjustable, they can be replaced into FPC if customers require.
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
The regular models are shown in the figure, and the special sizes can be customized.
